Extron mls 406sa2/23/2024 N Triple-Action Switching ™ – Blanks the screen during switching of RGB signals to eliminate visible switching transitions. N Loudness control – Boosts low and high frequencies to compensate for the normal decreased hearing ability of the human ear at low volume levels. N Volume control – Is adjustable locally from the front panel or remotely when integrated with a MediaLink Controller or a third party RS-232 based control system. The MLS 406SA provides 24 watts (2 x 12 watts rms) for 4 ohm speakers and 16 watts (2 x 8 watts rms) for 8 ohm speakers. N Integrated audio amplifier – The MLS 406MA provides 20 watt (rms) amplified mono audio output on captive screw terminals for a 4 or 8 ohm load or 70/100 volt distributed audio system. The two line level outputs, one fixed and one variable, can be set for mono or stereo via RS-232. N Balanced audio output – Balanced or unbalanced audio is output on captive screw connectors. N Auxiliary/Mix audio input – An additional input accepts mono line level audio signals for mixing with any of the six switchable inputs. N Audio inputs – Six balanced/unbalanced stereo audio inputs on three pairs of female RCA connectors, two female 3.5 mm stereo mini jacks, and one captive screw connector. N Local monitor output – 15-pin HD connector can function as an additional RGB output or as a local monitor output to enable preview monitor capability without the need for a distribution amplifier. The 15-pin HD can also be utilized as a buffered local monitor loop-through for the signal connected to input six. One is available on five BNC connectors and the other on a female 15-pin HD connector. N Versatile video outputs – Two RGB outputs are provided. N Video inputs – Three female BNC connectors paired with three 4-pin mini DIN connectors for composite video or S-video three female 15-pin HD connectors for computer-video, composite video, or S-video. N High bandwidth – 280 MHz (-3 dB) RGB video bandwidth maintains signal integrity. The MLS 406 switchers can be used as stand-alone switchers, or combined with an Extron MLC - MediaLink Controller to create an affordable system integration solution. MediaLink Switcher with integrated mono amplifier Like the line level outputs, the integrated audio amplifier can be configured for default stereo or dual mono output via RS-232. The MLS 406SA provides 24 watts (2 x 12 watts, rms) into 4 ohm speakers and 16 watts (2 x 8 watts, rms) into 8 ohm speakers. The MLS 406MA provides a 20 watt (rms) amplified mono audio output for a 4 or 8 ohm load or 70/100 volt distributed audio system. They can also be used as stand-alone switchers.Įach switcher includes two line level outputs, one fixed and one variable, that can be configured for mono or stereo output via RS-232. MLS - MediaLink Switchers are designed to be used in conjunction with an MLC - MediaLink Controller to facilitate low-cost integration. Designed as economical solutions for single-display classrooms and boardrooms, all three models provide composite video, S-video, computer-video, and audio switching. The Extron MLS 406, MLS 406MA, and MLS 406SA MediaLink ™ Switchers are simple-to-use, six input, multi-format active switchers.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |